Call Us

90-216-380-5555

27/200

image
27/200
27/200

27/200 trapezoidal form is the most economical and common form. It can be produced in various thicknesses and colors ranging from 0.40 to 0.80 mm, painted or unpainted with the coilcoating system from galvanized sheet or aluminum. The net coating area is 800 or 1000 mm. It can be cut to the desired lengths. The maximum length is 15 meters.

SPREAD LOADS THAT 27/200 FORM TRAPEZOIDAL SHEETS CAN CARRY (Kg/m2)

Joist Spacing (m) Galvanized Sheet Thickness (mm)
0.5 0.6 0.7 0.8 0.9 1.0 1.2
1.20 411 536 617 701 782 824 989
1.40 302 393 453 515 575 605 726
1.50 264 343 396 449 501 528 634
1.80 183 238 275 312 348 367 440
2.00 149 193 223 252 282 297 356
2.20 123 160 184 209 233 245 295
2.40 103 134 155 175 196 206 248
2.80 95 98 114 129 144 152 182
3.00 66 86 99 112 125 132 158
Moment of Inertia (J:cm4/m) 6.71 8.73 10.07 11.41 12.75 13.43 16.11
Moment of Resistance (W:cm3/m) 3.48 05.03 5.80 6.58 7.35 7.74 9.29

Safety Stress = 1200 kg/cm2. The calculations are based on a continuous beam shape.

27/200

USES OF GALVANIZED TRAPEZOIDAL SHEET:

  • Prefabricated Building Production
  • Roof and Facade Claddings
  • Wall and Ceiling Coverings as Decorations
  • Barrack Construction, Silo and Warehouse Construction
27/200

ADVANTAGES OF GALVANIZED TRAPEZOIDAL SHEET:

  • Galvanized trapezoidal sheet can be produced with a 38µm film coating.
  • Galvanized trapezoidal sheet has high resistance, it does not break or crack.
  • Galvanized trapezoidal sheet is resistant to fire and heat, it does not burn.
  • Excellent heat insulation can be achieved with the Sandwich systems done with polyurethane injection or insulation materials on galvanized trapezoidal sheet.
  • Galvanized trapezoidal sheet can be easily transported and can be easily painted. The ability to be painted provides a decorative appearance as well as a long-lasting coating material.
27/200
  • Galvanized trapezoidal sheet can also be produced in painted form in the desired sizes according to user request.
  • The values given in the table above are provided for preliminary information, the loads that corrugated sheets can carry should be calculated by the user.
  • The values are calculated based on a continuous beam shape and the safety stress is 1200 kg/cm2. The individual load should not only come to one point.
27/200